Official user manual (claims)¶
Source: CRR-users-manual-1.pdf archived in research/fcc/ of the
companion repo (right-half filing). Everything below is an official
claim, not a live-verified fact — where the bench contradicts it, the
field note wins (marked ⚠️).
Box contents¶
- Travel case
- Split keyboard (left + right halves)
- USB Y-cable
- Keycap/switch puller
- 3 spare switches + 2 spacers
Official spec sheet¶
| Item | Claim |
|---|---|
| Model | NAYA-800-1 (NAYA-CREATE) |
| Size | 212 × 118 × 18 mm |
| Weight | 1.4 kg |
| Body | Aluminum + polycarbonate |
| Switches | Kailh low-profile clicky, CPG-1232 (0.45 × 0.42 mm pins) |
| Keycaps | Low-profile, backlit, transparent characters |
| Battery | Internal ("45mA" in the sheet — read as small buffer cells, see ⚠️) |
| Radio | Bluetooth 5.4 |
| Power input | 4.2 V |
⚠️ Field note: the bench measures two FH301217 50 mAh pouch cells (one per half) plus ~2200 mAh module packs carrying the real runtime (see Power). "45mA" is consistent with the buffer cells.
Module indicator LEDs (official table)¶
The small LEDs on the modules report charge/connect state:
| Pattern | Meaning |
|---|---|
| Blinking red | Battery low |
| Solid red | Charging problem |
| Blinking orange | Charging |
| Blinking green | Near full |
| Solid green | Fully charged |
| Blinking white | Connecting |
| Solid white (2 s) | Connected |
Sleep defaults (official)¶
- Sleep: 1.5 min idle (configurable; see
fe/100a) - Deep sleep: 10 min (configurable; see
fe/100a)
Pairing and output modes¶
- Bluetooth slots:
Layer2 + 1…5selects the paired device slot. - Enter pairing mode:
Layer2 + Esc. - USB mode:
Layer2 + Zswitches a half to wired output. - Cable: the supplied Y-cable powers/links both halves over USB.
Charging¶
- Modules charge over Qi — docked on a half or standalone on any Qi pad.
- Halves charge over USB; docked modules charge from the half.
- OS support claimed: Windows 10+, macOS Ventura+, Ubuntu 24.04.
Official best-practices (verbatim guidance)¶
- Do not use a wall outlet — charge from a computer USB port (5 V / 1 A).
- Power draw is rated 5 V ⎓ 1.5 A (matches the FCC label).
- Keep firmware updated via NayaFlow.