Skip to content

Exhibit inventory (read as text)

FCC internal/external photos and report text, re-read on the second pass for silkscreen, chip markings, test points and labels — not for hero shots. Source files: research/fcc/ in the companion repo.

Boards (per-PCB silkscreen revisions)

Board Silkscreen Where seen
Half mainboard Create_L_KB 20250220_V11 (bottom + top) fullres p6-Im1/p6-Im2
Wing board Create_L_Wing 20250206_V11 fullres p9-Im1
Dongle BOK17_Dongle 20241106 V01 DG p0/p1
Tune module ring Tune_Touch_20240926_V00 CRL-view-4
Track module ring Y08_06025_20250227_V00 CRL-view-5
Module MCU board Touch_MB 20250227 V10 (carries STM32F411CEU6) hardware.md

SoCs (confirmed on die)

Part Marking Role
nRF52811 N52811 / CKAAD0 / 2301ME halves
nRF52840 N52840 / CKAAD0 / 2301ME dongle
STM32F411CEU6 readable on ring board module MCU (Tune/Track)

Batteries (label text)

Pack Label Where
Half buffer cell FH301217 3.7 V 50 mAh 0.185 Wh CRR/CRL teardowns
Tune module FH 202030 3.7 V 1000 mAh 3.7 Wh (20250603) CRL-view-4
Track module FH364046 3.7 V 700 mAh 2.59 Wh (20250611) CRL-view-5
Smallest puck ICR … 300 mAh 3.7 V 1.11 Wh (cylindrical) CRL-view-6

Test points (labeled)

  • Half mainboard USB-C tail: SWDIO / SWDCLK / TP1 / TP7 + D+/D- + ANT keepout — the halves break out SWD at the tail (fullres p4-Im2).
  • Dongle back: SWDIO / TP1 / TP2 (DG p1-Im2).

Antennas

Part Type Gain
RF0400A (halves) PCB 0.8 dBi (CRL BLE test report)
RF0401A (dongle) PCB 0.91 / 2.29 / 3.70 dBi @ 2400/2450/2500 MHz, eff. 17.8→31.6 % (DG antenna spec, EMQuest EMQ-100, BTL anechoic, tested 2025-07-14)

Report metadata

  • BLE test report no. BTL-FCCP-1-2506C291, GFSK, PHY 1M/2M/125 k coded.
  • Test software: nrfconnect-setup-5.1.0.
  • Grant issued 2025-08-29, lab BTL Inc (Dongguan).

Corrections this pass

  • Half mainboard photo shows V11 silkscreen (20250220); the earlier KB table said V13. The live unit's rev may differ from the filing rev — recorded as the filing's rev here, with the table updated to note the V11 exhibit.
  • Module MCU (STM32F411CEU6) was already correct in the hardware table — the second pass confirms it on die and adds the per-module ring board names (Tune/Track).